Kae Hwa Knowledge Center

Breathable Film Technology & Industry FAQ Guide

Knowledge Center/1. Materials & Fundamentals

How Do You Read a Breathable Film Technical Data Sheet?

Direct Answer

A technical data sheet (TDS) summarizes a material grade and its measured or specified properties. For breathable films, the most useful information usually includes polymer type, film construction, basis weight or thickness, WVTR, water resistance, mechanical performance, and test methods. The figures should be read as a connected set—not as independent promises about every end-use condition.

Technical Data SheetIllustrative layout · no product values shown
1

Material identity
Polymer typeFilm or laminateMicroporous · Monolithic · Non-breathable
2

Construction
Supporting textile or nonwovenNumber of layers
3

Basis weight / thickness
GSM (g/m²)Thickness (µm)Roll widthTolerance
4

WVTR
———MethodTest environment
5

Hydrostatic head
———Test pressure
6

Tensile strength and elongation
MDCD
7

Tear / puncture, bond strength
Where requiredLaminates
8

Value type
TypicalTargetMinimumGuaranteed
The tags above are field names only; no product values are shown. Always read actual values together with their units and test conditions.

Anatomy of a typical breathable-film TDS (schematic). Field names vary between suppliers.

1Start with Material Identity and Construction

Check

Which polymer system?

PEPPTPEENylonOther
Check

Film or laminate?

Standalone film, or a film bonded to a textile or nonwoven.

Check

Which breathability type?

MicroporousMonolithicNon-breathable

These distinctions shape the meaning of every other performance figure. A laminated fabric should also identify the supporting textile or nonwoven and the number of layers where relevant. Two materials with the same total GSM may have very different structures.

2GSM and Thickness Are Not Interchangeable

Basis weight

GSM · g/m²

Mass per unit area.

≠
Thickness

Micrometers · µm

Typically stated in micrometers.

The relationship between the two depends on density, porosity, formulation, and structure. For that reason, GSM cannot be converted into an exact thickness without additional information.

For converting operations, buyers should also review roll width, winding orientation, and agreed dimensional tolerances.

3Understand the Performance Fields

WVTR

The amount of water vapor transmitted under a specified method and test environment. Check the exact method rather than comparing only the numerical result.

Hydrostatic head

Resistance to liquid-water penetration under test pressure. It is a different property from WVTR.

Tensile strength and elongation

Response to pulling, frequently reported in machine direction (MD) and cross direction (CD).

Tear or puncture performance

Resistance to particular mechanical damage mechanisms, where required.

Bond strength

Relevant for laminates, but strongly influenced by the structure and the test protocol.

Read them as a set

The figures are a connected set—not independent promises about every end-use condition.

4Read Every Number with Its Test Conditions

A credible comparison records all of the following:

Units
Method designation
Test environment
Specimen type
Value type
A figure may beTypicalTargetMinimumGuaranteed

If a field is missing or appears ambiguous, request clarification from the supplier.

TDS values should not be confused with a certification for a finished medical gown or protective garment. Certifications and test reports have their own defined scopes.

5Questions to Ask Before Approval

?Which values are specifications versus typical observations?
?What test method applies?
?Were tests conducted on film or the final laminate?
?What tolerances apply from roll to roll?
?Which properties need confirmation after your own cutting, bonding, printing, or sealing steps?
Key Takeaway

The most informative TDS is not the one with the highest WVTR or hydrohead alone. It is the one that enables consistent, application-relevant comparison with clearly identified methods, constructions, and tolerances.